STRIDE obtained MS ISO/IEC 17025: 2005 with the Laboratory Accreditation Scheme of Malaysia, SAMM number 585 for 42 scopes of testing on 8 March 2013. The recognition of ISO/IEC 17025: 2005 have proven that the testing management system and calibrations carried out by STRIDE laboratories is credible and competent even recognized by international agencies.

Laboratory Name: Material Technology

Scope of Testing:

  • Distillation at Atmospheric Pressure
  • Flash Point by Pensky Martens Closed Cup Tester
  • Corrosiveness to Copper from Petroleum Products by Copper Strip Test
  • Density of Liquids by Digital Density Meter
  • Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and Calculation of Kinematic Viscosity)
  • Flash Point by Abel Closed Cup
  • Acid Number by Potentiometric Titration
  • Base Number by Potentiometric Perchloric Acid Titration
  • Water Reaction
  • Electrical Conductivity
  • Measurement of Fuel System Icing Inhibitors (Ether Type)

corrosive electric tong 1 uji bahan 2

Laboratory Name: Vehicle

Scope of Testing:

  • Measurement of noise inside stationary road vehicles
  • Measurement of sound pressure level emitted by stationary road vehicles

Exhaust Noise Measurement Noise Measurement Preparation

Laboratory Name: Personnel Equipment

Scope of Testing:

  • Thickness of the upper
  • Height of the upper
  • Insole thickness
  • Outsole thickness
  • Upper flexing resistance-Bally flex
  • Tensile strength of upper material
  • Sole adhesion test
  • Tensile strength of outsole

18 19 20 21

Laboratory Name: Nutrition and Rations

Scope of Testing:

  • Determination of Crude Fibre
  • Determination of Crude Fat

1animal feed samples 1 2dried samples 3drying of samples 4seiving of animal feed sample

Laboratory Name: Metrology Thermo Physical

Scope of Testing:

  • Liquid-In-Glass Thermometer (Total Immersion)
  • Temperature and Humidity Indicator or Recorder
  • Temperature Controlled Enclosures

4 Calibration of Temperature and Humidity Indicator Calibration of Temperature and Humidity Indicator1 kalibrasi termometerLIG Temperature Controlled Enclosures Calibration

Laboratory Name: Metrology Mechanical

Scope of Testing:

  • Torque Tools Device (Torque Wrench)
  • Standard Weight
  • Analytical Balance and Weighing Scale

2 3 Torque Tool Tester Torque Wrench Calibration

Laboratory Name: Mechanical and Structures

Scope of Testing:

  • Vickers Hardness 1gf to 30kgf
  • Tensile Testing

mkanikal 1 mkanikal 2 SEM Microscope

Laboratory Name: EMC

Scope of Testing:

  • Radiated Emission, Electric Field 10kHz to 18GHz

EMC1 EMC Testing in EMC Chamber 6

Laboratory Name: Corrosion Lab

Scope of Testing:

  • Vickers Hardness (0.1kgf and 1kgf load)

subhi1 subhi2 subhi3 subhi4

Laboratory Name: Textile Technology and Analysis

Scope of Testing:

  • Breaking Load
  • Tearing Strength (double tear method/tongue tear)
  • Mass per unit area
  • Thread Count
  • Quantitative Chemical Analysis on Mixtures of Cellulose And Polyester Fibres
  • Qualitative Analysis of Textile Fibres
    • Solubility Test
    • Burning Test
    • Microscopic Examination

15 16 17 thread count per cm Tearing Test 2 Mass per unit area 2

Laboratory Name: Maritime Support

Scope of Testing:

  • Corrosiveness to Copper from Petroleum Products
  • Water Reaction of Aviation Fuels

water reaction2