Petroleum, Oil and Lubricant

  • Distillation at Atmospheric Pressure

To determine quantitatively the boiling range characteristics of petroleum products using automated distillation apparatus.

astm


  • Kinematic Viscosity

To determine the kinematic viscosity of petroleum products. The viscosity is reported at one of two temperatures, either 40°C (100°F) or 100°C (212°F).

astm 01


  • Measurement of Fuel System Icing Inhibitors (Ether Type)

To measure the concentration of Diethylene Glycol Monomethyl Ether (Di-EGME) in aviation fuels.

astm 02


  • Water Reaction

To determine the presence of water-miscible components in aviation turbine fuels, and the effect of these components on volume change and on the fuel-water interface.

astm 03


  • Particulate Contamination

To gravimetrically determine the amount of particulate contaminant in a sample of aviation turbine fuel by filtration.

astm 04


  • Corrosiveness to Copper from Petroleum Products by Copper Strip Test

To determine the corrosiveness to copper of petroleum product.

astm 05


Maritime Platform Surveillance

  • Vibration Measurement And Analysis

Vibration measurement and analysis on ship machinery and structure.

PENGUJIAN GETARAN


  • Noise Level Measurement

Measurement of surrounding noise level.

PENGUJIAN HINGAR


  • Material Acoustic Properties Test

Sound absorption coefficients and impedance test.

PENGUJIAN SIFAT AKUSTIK BAHAN


Non-Destructive

  • Radiography

Radiographic testing on the welded part or location on ship structure to identify defects or discontinuities.

radiografi


  • Magnetic Particles

Test to identify defects or discontinuities on on welded structures constructed based on ferromagnetic materials such as iron, nickel and cobalt.

magnetic


  • Dye Penetrant

Testing to identify surface defects such as crack on components and structures which due to cyclic loading or fatigue effects.

dye


  • Thickness Measurement

Test to identify hull thickness.

thickness


Material

  • Material Composition Determination (Metal/Alloy)

Determination of material compositions by elemental analysis for solid, powder or liquid samples.

Tools :
- Atomic Absorption Spectrometer Hitachi Zeeman.
- Wavelength Dispersive X-ray Fluorescence Spectrometer (WDXRF) Bruker S4 Pioneer.

Material Composition Determination2 Material Composition Determination3 Material Composition Determination4


  • Material Microscopic Analysis (Microstructure, Metallurgy)

Microstructure analysis of materials through micrography sampling procedures. The purpose is to identify the type of alloy, material defect, material failure source etc.

Tool :
- Image Analyzer AxioVision.

Material Microscopic Analysis Material Microscopic Analysis2 Material Microscopic Analysis3


  • Topographical Analysis (Confocal LSM)

Characterization of the material through surface topographic features (Eg: Corrosion Classification). Using laser source at a certain wavelength to ensure the accuracy of the surface observation. Using 2D & 3D imaging.

Tool :
- Confocal Laser Scanning Microscope (CLSM).

Topographical Analysis Topographical Analysis2


  • Micro-Hardness Testing (Vickers)

Hardness tests for metal/alloys, paints, wires, cables.

Micro hardness testing


  • Material Electrochemical Test & Analysis (Material Corr. Characterization, Electrochemical Impedance Spestroscopy)

Study on material behaviour against corrosion in marine environment.

Material Electrochemical Test Material Electrochemical Test2 Material Electrochemical test3


  • Material Failure Analysis

Identify the causes of component/material failure in the field and laboratory. Non and Destructive testing covers microscopy (microstructure, morphology and topographical testing), mechanical testing (hardness, tensile and electrochemical testing.

Material Failure Analysis Material Failure Analysis2 Material Failure Analysis3


  • Indoor Air Quality (IAQ) Test

Inspection of indoor air quality at closed space environment (building/vessel) to monitor and ensure the quality of healthy environment for employees/members/staff.

Indoor Air Quality Test2 Indoor Air Quality Test3 Indoor Air Quality Test4


  • Scratch Tester

Material testing: To determine the capability of coating or the surface of the modified material - scratch, critical load (brittle and hard coating), working load (soft coating) and coating-substrate.

Scratch Tester


  • Wear Tester (POD)

Mechanical test material: To determine the material's capability/durability on friction and wear surface of the material/coating.

Wear Tester


  • Accelerated Surface Area & Porosimetry (ASAP) Test

Material surface characterization, porosity rate, chemical properties of chemisorption or physisorption.

Accelerated Surface Area


  • Wear Metal Analysis

Determination of metal elements dissolved or suspended as fine particles in petroleum-based products.

wear metal analysis


For more detailed information, please contact:

Puan Noor Shahida Binti Azmi

Telephone: 605-6810 602