• Airship Service MZ-600ME

The airship is equipped with an automatic flight control system without a pilot as well as using GPS. The system provides services as a remote monitoring platform and a data collection center.

MZ 600ME MZ 600ME 2

  • Aerostat S-3M

The aerostat is equipped with a load system such as a camera with GPS to be used as a remote monitoring platform system.

aerostat S3M aerostat s3M 2

Structural and Mechanics

  • Metallographic Examination

A specimen preparation process for microscopic examination and micro structure study of material physical characteristic.


  • Static Tensile Testing

Static tension test to determine mechanical properties of material.

Static tensile

  • Dynamic Tensile Testing

Recurring tension test to determine fatigue properties of material.

dynamic tensile

  • Micro Hardness Testing

To determine hardness of material (10 – 1000gf).

 microhardness test

  • Macro Hardness Testing

To determine hardness of material (1kgf – 120kg).


  • SEM-EDX Examination

Material science analysis to determine micro structure, morphology and elements.


  • Bend Test

Test to determine the ductility of material.

Static tensile

  • Compression Test

To determine mechanical properties of material.

Static tensile

  • 3D Infinite Focus Microscope Examination

3D surface analysis and morphology measurement.

3d microscope

  • Charpy Impact Testing

Test to determine strength of material.

Charpy test

Material Technology

  • Distillation at Atmospheric Pressure

To determine quantitatively the boiling range characteristics of petroleum products using automated distillation apparatus.


  • Dropping Point

To determine the dropping point of lubricating grease.


  • Flash Point by Pensky Martens Closed Cup Tester

To determine the flash point of petroleum products in the temperature range from 40 to 370°C using an automated Pensky Martens closed-cup apparatus.


  • Corrosiveness to Copper from Petroleum Products by Copper Strip Test

To determine the corrosiveness to copper of aviation turbine fuel having a vapor ressure no greater than 124kPa (18psi) at 37.8°C.


  • Density of Liquids by Digital Density Meter

To determine the density, relative density and API Gravity of petroleum distillates and viscous oils that can be handled in a normal fashion as liquids at the temperature of test using automated sample injection equipment.


  • Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and Calculation of Kinematic Viscosity)

To determine concurrent measurement of both the dynamic viscosity and the density of liquid petroleum products and crude oils, both transparent and opaque.


  • Flash Point by Abel Closed Cup

To determine the flash point of petroleum products in the temperature range from -5 to 66.5°C using an automated Abel closed-cup apparatus.


  • Electrical Conductivity

To determine the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive.


  • Measurement of Fuel System Icing Inhibitors (Ether Type)

To measure the concentration of Diethylene Glycol Monomethyl Ether (Di-EGME) in aviation fuels.


  • Water Reaction

To determine the presence of water-miscible components in aviation turbine fuels, and the effect of these components on volume change and on the fuel-water interface.


  • Particulate Contamination

To gravimetrically determine the amount of particulate contaminant in a sample of aviation turbine fuel by filtration.


  • Flash Point, Cleveland Open Cup

To determine the flash point and fire point of petroleum products by a manual Cleveland open cup apparatus.


  • Metal Composition Analysis by EDXRF

To determine the elemental composition of materials in metal and liquid samples.


  • Carbon Sulphur Determination

To determine carbon and sulphur elements in metal, cement, coal and soil samples.


  • Cone Penetration

To measure the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass, and finish.


  • Water by Coulometric Karl Fisher

This test is for direct determination of water in the range of 10 to 25 000 mg/kg entrained water in petroleum products and hydrocarbons using automated instrumentation.



  • Sound Noise Measurement

Measurement of noise in vehicles or generated from engines, exhaust and others. This test has been certified by the Malaysian Laboratory Accreditation Scheme (SAMM) which is the test of noise from in the vehicle and generated from the vehicle.

soundtest 01 soundtest 02

  • Vibration Measurement

Whole-body Vibration and Hand-arm Vibration measurements resulting from vibration of seat and steering of vehicle.

vibration 01 vibration 02

  • Floor Mounted Brake Tester

Measures the performance of indoor braking ability.

floor 01

  • Thermal Comfort

Measure heat stress ie human comfort over heat stress in vehicle or building space.

thermal 01 thermal 02

  • Vibration Test By Vibration Analyzer

Vibration measurements on mechanical structures can be performed using this equipment. A component can be determined either in a defective condition or by using the vibration analysis method.

analyzer 01 analyzer 02

  • Environmental Chamber

One room chamber that simulates test conditions against equipment or vehicles from -10°C + 80°C dan humidity range: 40 – 98%.


  • Tilt Table

To determine vehicle stability during tilting in steep areas. Maximum weight test vehicle for this test is 25 tonnes.

tilt 01

  • Shaker

Shaker is used to simulate or impose vibration on test equipment such as mechanical and electronic equipment. In addition, the simulation of vibration to the human body is also possible.


  • Brake Tester

Measure braking perforamance easily in the field. Correlation between vehicle velocity, deceleration value, pedal force and braking distance can also be measured.


  • Weighing Bridge

Measure the weight of the entire vehicle either by Gross Vehicle Weight or Payload.


For more detailed information, please contact:

Puan Zaliya binti Mohd Yusof

Telephone: 603-8732 4579